We need water every day of our life. but most of us don’t even think about the journey of tap water before it pours from our faucet. In past, access to clean drinking water could literally be a life and death struggle. But today, we simply have to contact our local community water supplier.
Nowadays, access to drinking water is not only much easier than in the past, but the water quality is also better. The main reason for this is disinfection. Disinfection of your water supply is an extremely crucial component of a national public health system, and the backbone of water disinfection is the use of the chemical additive chlorine.
Also, read our latest blog post about How To Remove Chlorine From Water
Why Chlorine is being added to drinking water?
Chlorine is being added to the drinking water to protect against harmful impurities and diseases. Treating drinking water isn’t a new process. But the transition in the chlorination of water sources had immense public health consequences.
Usually, tap water has a high level of chlorine and tastes similar to the pool water. Without a carbon filter, the free chlorine level in most cities' treated water may be higher than it should be for healthy water consumption.
Safe Level of Chlorine in Tap Water:
Though, the addition of chlorine in drinking water has proven to be a powerful method for ensuring that many people have access to safe & clean drinking water in the US. But it also has some drawbacks and health risks, like other contaminants in drinking water.
Also, read our guide about the Types of Contaminants in Drinking Water
The Environmental Protection Agency (EPA) has determined some values known as Maximum Residual Disinfection Level for how much chlorine can be considered safe in drinking water. currently, this level is less than 4 milligrams per litre.
It is essential to recognize the levels set by EPA because some people have sensitivities to certain chemicals which may lead to serious health concerns. Moreover, chlorine in your tap water is also problematic if it is used during the dialysis treatment, which requires a large amount of water to clean waste out of the patient.
The level of chlorine in tap water varies depending on a variety of factors. A simple way to understand the level of disinfection in your drinking water is to check the most recent water quality report published by your local water supplier.
Most water suppliers publish reports on an annual or semi-annual basis. Although, they won’t tell you how much disinfection is in your tap water at any given time. Instead, they will provide you with a general understanding of how your water supplier is treating the water that is piped to your home and what is the level of disinfection in your water.
Ways To Chlorine From Tap Water
If you are like most people, you probably don’t give much thought to the quality of your tap water. However, if you are concerned about the levels of chlorine in your water, there are a few different ways that you can remove it.
One of the best ways to remove chlorine from tap water is to use a water filter. There are many different types of water filters on the market, and you can find one that is specifically designed to remove chlorine. Water filters can be installed on your kitchen faucet or under your sink, and they will filter out the chlorine before it comes out of the tap.
Another way to remove chlorine from tap water is to let it sit for a while before you use it. If you are going to be using the water for drinking or cooking, you should let it sit out in a pitcher or other container for at least 30 minutes.
This will give the chlorine some time to evaporate. If you are concerned about the levels of chlorine in your shower water, you can install a shower filter. Shower filters are designed to remove chlorine from the water before it comes out of the showerhead.
There are a few different ways to remove chlorine from your tap water, and it is up to you to decide which method is best for you. If you are concerned about the levels of chlorine in your water, you should take steps to remove them.
Frequently Asked Questions
What is chlorine?
Chlorine is a gas that is used to disinfect water. When chlorine is added to drinking water, it produces a weak acid called hypochlorous acid. This acid is a strong disinfectant that kills bacteria, viruses, and other microorganisms in water.
Is chlorine in all tap water in the United States?
Yes, chlorine is added to all public water systems in the United States. This is done to kill harmful bacteria and other microorganisms that can cause disease.
Does tap water have chlorine?
Yes, most tap water does have chlorine. Chlorine is added to water to kill bacteria and other microorganisms that can cause disease. Although chlorine is effective at disinfecting water, it can also be harmful to your health if you drink it in large amounts.
Is chlorine in tap water bad for you?
Chlorine can be harmful to your health if you drink it in large amounts. However, the amount of chlorine in tap water is usually not enough to cause any health problems.
How do you remove chlorine from your tap water?
The best solution to remove chlorine from your tap water is using a water filter. Water filters can be bought at most hardware stores.
Final Words:
Chlorine is a gas that is used to disinfect water. It is added to all public water systems in the United States to kill harmful bacteria and other microorganisms. Chlorine makes water safe to drink by killing these microorganisms, but some people may be sensitive to the taste and smell of chlorine.
However, you may want to consider using a water filter to remove the chlorine from your tap water if you are concerned about its effects on your health.
