What is lightning conductor ? Write its uses (2024)

FAQs

What is lightning conductor ? Write its uses? ›

Lightning Conductor is a device used to protect buildings from the effect of lightning. A metallic rod, taller than the building, is installed in the walls of the building during its construction. One end of the rod is kept out in the air and the other is buried deep in the ground.

The conductor which is fixed on the top of the building to protect the buildings from the damage by lightning. The conductor consists of several sharp metal spikes connected to a thick copper strip. The other end of the copper strip is fixed to a metal plate buried inside the ground. The process is called earthing.

A metal rod placed on top of a building to protect it from a lightning strike is known as a Lightning Conductor. This conductor is struck first in lightning without hitting the building directly, preventing fire or electrocution.

The correct answer is Copper. The metal used to make lightning conductors is copper.

Lightning rods (and the accompanying protection system) are designed to protect a house or building from a direct lightning strike and, in particular, a lightning-initiated fire.

Lightning Conductor is a device used to protect buildings from the effect of lightning. A metallic rod, taller than the building, is installed in the walls of the building during its construction. One end of the rod is kept out in the air and the other is buried deep in the ground.

Examples of Conductors

Copper, Brass, Steel, Gold, and Aluminium are good conductors of electricity. We use them in electric circuits and systems in the form of wires.

Most residential homes don't need lightning protection. However, if you have the following conditions then a lightning rod and lightning protection makes sense: You live in an area with a high frequency of lightning strikes. The home is tall.

Why should I have a lightning protection system in place? Having a lighting protection system in place helps prevent electrical fires during a lightning storm and reduces the likelihood of electrocution due to a lightning strike.

Once the bolt strikes, the rod safely channels the millions of volts of energy through copper or aluminum cables around the home and into the ground, thereby protecting the house from the massive energy surge had the strike come in via wires or pipes.

What is lightning conductor a device used to protect? ›

A lightning conductor is a device used to protect buildings from the effect of lightning. A metal rod taller than the building is installed in the walls of the building during its construction. One end of the rod is kept out in the air and the other is buried deep in the ground.

Copper makes the best lightning conductor—there is no fear of having it too thick: Faraday says, "the solid section is the grand object." It has hitherto been held by many to be a scientific fact, that the surface was everything in a lightning conductor, hence twisted iron rods and flattened strips have been ...

A lightning conductor is made of copper because copper is a good conductor of electricity.

All tall buildings now have lightning conductors. Lightining conductors carry the electrical current away from the building and safely to the ground. If an unprotected building is struck then any moisture within the fabric of the building turns instantly to steam, with dramatic results.

Lightning conductor does not allow the charge to accumulate on a building. It transfers all the charges to the earth, protecting the building from being struck by lightning.

Metal pipes and wires can allow lightning to travel into a house with often damaging and dangerous results. It's rare for someone to be killed by lightning indoors, but 32% of all lightning injuries occur inside.

Lightning conductors are used to protect building from lightning strikes.